|
DC V
|
600.0mV/6.000/60.00/600.0/600V
(Input Impedance: 10MΩ, 100MΩ only 600mV)
|±0.5%±2dgt (600.0mV/6.000/60.00/600.0V)
|±0.8%±3dgt (600V)
|
|
AC V
|
6.000/60.00/600.0/600V
(Input Impedance: 10MΩ)
|±1.0%±3dgt (6.000/60.00/600.0V)
|±1.5%±3dgt (600V)
|
|
DC A
|
600/6000µA/60/600mA/6/10A
|±1.2%±3dgt (600/6000µA/60/600mA)
|±2.0%±5dgt (6/10A)
|
|
AC A
|
600/6000µA/60/600mA/6/10A
|±1.5%±4dgt (600/6000µA/60/600mA)
|±2.2%±5dgt (6/10A)
|
|
Ω
|
600Ω/6/60/600kΩ/6/60MΩ
|±1.0%±2dgt (600Ω/6/60/600kΩ/6MΩ)
|±2.0%±3dgt (60MΩ)
|
|
Continuity buzzer
|
0~600Ω (Buzzer sounds below 100Ω)
|
|
Diode Check
|
2.8V Release Voltage:Approx. 0.4mA Test Current
|
|
Capacitance
|
40/400nF/4/40/400/4000µF
|
|
Frequency
|
10/100/1000Hz/10/100/1000kHz/10MHz
|
|
DUTY
|
0.1~99.9% (Pulse width/Pulse period)
|±2.0%±2dgt (~10kHz)
|
|
Temperature
|
-50~300ºC (-58~572ºF)
(with the use of Temperature probe 8216)
|
|
|
Note:
|
KEW 1011 can measure max. 700ºC
In order to measure over 300ºC, please use a K-type temperature probe available in the market.
|
|
|
Display
|
6040 Counts
|
|
Withstand Voltage
|
AC 3700V / 1min.
|
|
Applicable standards
|
IEC 61010-1 CAT.III 300V Pollution degree 2
IEC 61010-1 CAT.II 600V Pollution degree 2
IEC 61010-031
IEC 61326
|
|
Power Source
|
R6P (1.5V) × 2 (Auto-power-OFF within 15 minutes)
|
|
Dimensions
|
161(L) × 82(W) × 50(D)mm
|
|
Weight
|
Approx. 280g
|
|
Accessories
|
7066A (Test leads)
8216 (K-type Temperature probe)
0.8A/600V (Ceramic Fuse) × 1 built-in
10A/600V (Ceramic Fuse) × 1built-in
R6P × 2Instruction Manual
|
